“Canon MG3020 Setup” to WiFi is simple and easy. But there is a chance of getting stuck at canon Pixma mg3020 wireless setup some instances due to which you may need help. So if you have no idea, take the following steps to proceed.
Uncompromising Steps for Connecting Canon PIXMA MG3020 printer to WiFi
Step 1: Turn on the printer for your Canon PIXMA setup.
Step 2: Be sure that there is a steady green light beside the Power button.
Step 3: Proceed to press and hold the wireless button.
Step 4: With flashing out blue wireless button LED, press the color button on your Canon PIXMA.
Step 5: Press the wireless button once till the network light is lit.
Step 6: Hit on the color button and check whether the wireless light is blinking fast.
Step 7: Insert the Canon PIXMA MG3020 driver CD that you would have got when purchasing your printer into the CD drive of your PC.
Step 8: Tap on the Start Setup button to go with the installation process.
Step 9: When you get prompted, attach your Canon PIXMA device to the PC through the wireless network using the router.
Step 10: To connect through a wireless network, switch on your router by plugging the power cable into the power socket.
Step 11: Press the WiFi button that you can find on your printer and keep holding it until the light gets on, and then wait for some time, and press the WPS button located on the router.
Step 12: Once the power and WiFi lights become stable, the WiFi network will connect to your printing device.
Step 13: Now, give a command to print a test page and make sure that the device is responding properly.
How to Contact Printer Service Executive Member for Immediate Help?
By following all the above-mentioned steps, you can easily connect a Canon printer to a wireless network. If you still have the issue of “Canon MG3000 Setup” because the printer not responding, you must contact our team directly to connect with one of the expert professionals for immediate assistance.
Comments